aegis 7000 installation manual

It is designed for residential and commercial buildings, military and government sites, industrial facilities, or any location where access control is required. It uses a dedicated phone line and connects to the public telephone network. Authorization for access control is through the telephone line, or with the tenant's own access code, which is entered on the system keypad. The tenants MUST have a telephone to allow remote visitor access. The system parameters and tenants data will be entered via the keypad and the LCD provides easy display. EEPROM technology is used for AeGIS 7000 series. The tenant database will not be lost during a power failure. Standard features: Program and store the tenant's name, directory code, telephone number and personal access code. Unlocking door or gate remotely by the tenant using his or her telephone keypad. Unlocking door or gate by the tenant using his or her own private access code. Built-in back-light LCD directory, Postal Switch. Works behind a PBX to dial extensions (analog only). Keypad Activated to support Voice Mail. Programmable features: 2, 3 or 4 Digit Directory Code Lock Out Count Manual Unlock-Auto Countdown Re-lock. 4 Digit Unit master Code Open Interval Talk Time Technical Specifications: Power Input: 12 VAC 40 VA (supplied) or 12 VDC 40VA UL Listed Transformer Current Consumption: 500mA idle, 700mA operation Emergency Battery: 12Vdc, 4Ahr rechargeable (not supplied) Telephone Line: Standard voice grade RJ11 jack. Night Light: 14V 0.080A 15,000 Average life hours. If they do not match, please contact Pach and Company toll free number at (888) All the items listed below come with the. If you have missing items, please contact your distributor or Pach and Company at (888) System (7050, 7150 or 7250). XMFR (Power Transformer, 12VAC 40VA). 2-pin terminal connector (inside the cabinet) 4-pin terminal connector (inside the cabinet). 5-pin terminal connector (inside the cabinet).

• aegis 7000 installation manual, aegis 7000 installation manual pdf, aegis 7000 installation manual download, aegis 7000 installation manual instructions, aegis 7000 installation manual free.

Pach and Company is not liable for any errors that might occur from use of this document, nor is any commitment to update the information herein implied. Pach and Company does not assume any liability for any damages, which may arise in installation or use of the AeGIS 7000P Series. It is important for you to read and follow the manual completely. This warranty extends only to wholesale customers who buy direct from Pach and Company or through Pach and Company’s normal distribution channels. Pach and Company does not warrant this product in any way to the end user consumer. Repeat step 1 to edit another tenant directory.WARNING: SYSTEM WILL BE DISABLED FOR 90 SECONDS IF INVALID ACCESS CODE HAS BEEN ENTERED ACCORDING TO THE SETTING OF LOCK-OUT COUNT (FUNCTION CODE 72, p19) Must check at the end of the phone cord. 3. Disconnect the microphone and speaker connector then check the speaker’s impedance, must read between 18-24 ohms 4. Located on the back of your AeGIS system is a label that contains, among other information, the FCC registration and ringer equivalence number (REN) for the system. Prior to installing your AeGIS system, please call your telephone company and provide them the FCC registration and REN numbers as well as the telephone number of the line to which you will connect the system. Now, you are in programming mode and see table below to continue. Now, you are in programming mode and see table below to continue. When the system answer. Pach and Company does not assume any liability for any damages, which may arise in installation or use of the. Pach and Company does not assume liability for any incompatibility between the and users devices. It is important for you to read and follow the manual completely. The Aegis 7000 Series comes with two years warranty, see section 1.4 for more detail on warranty policy. 1.2 System Description, Specifications and Accessories utilizes microprocessor technology to provide security as well as convenience to you.

IMPORTANT REPAIR NOTE: Pach and Company will perform a factory physical evaluation of all products submitted for repair at receipt of item, and reserves the right to decline repairs after said physical evaluation. In the event a returned product is deemed ineligible for repair; the product will be returned to sender via common carrier ground at Pach and Company expense. 11 Chapter 2 INSTALLATION A proper installation of the AeGIS system is very essential. You MUST follow the installation procedures, block diagrams and installation requirements as specified in this chapter Figure 2.1 Pach and Company Chapter 2 Page 4 INSTALLATION 12 1 GROUNDING Grounding the AeGIS steel enclosure is essential. Please comply with all local ordinances and industry standard procedures to ensure a complete and safe ground. Recommended earth grounds are: Use 18-gauge solid wire for grounding. Installing a ground steel rod from the AeGIS steel enclosure to the earth ground. Installing a solid heavy gauge wire from the AeGIS steel enclosure to a water pipe. One surge protector must be used for each AeGIS 7000 system. Twisted pair category 5 is the minimum requirement if the distance less than 200 feet. Shielded wires are recommended to avoid radio reception or any other noise problems. If the distance is more than 200 feet, 2-conductors, 18-gauge shielded stranded is recommended. Ground one end of the shielded to earth ground. See installation instruction if ASP1 Surge Protector is used. If a PBX line is used connect the AeGIS to the analog PBX's extension to dial the extensions within the PBX. Do not connect to a PBX's Digital Port. You MUST use two conductors 18 gauge stranded wire minimum. Note: Some door strikes are creating electrical or magnetic noise or spikes and could create problem to the system's memory. You have to purchase the postal lock from your local post office. See figure 2.2 to alter the postal switch to normally closed. LCOM LCOM POST Figure 2.2 (a) POWER Figure 2.

Key sets (2 keys per set) RJ-11 adapter (inside the unit's cabinet). Owners Manual. 1.4 Limited Warranty Pach and Company new products are warranted to be free of defects in material or workmanship for a period of two years, (24 months), from the date of purchase. This warranty extends only to wholesale customers who buy direct from Pach and Company or through Pach and Company s normal distribution channels. Pach and Company does not warrant this product in any way to the end user consumer. All implied warranties, including warranties for marketability as well as implied warranties for suitability, are valid only until the warranty expires or is voided, whichever comes first. No returns accepted without RMA. 7. Return Merchandise Authorization (RMA) numbers will not be issued to the end-user consumers. Pach and Company Chapter 1 Page 3 GETTING STARTED 8 NEW PRODUCT WARRANTY EXCEPTION WIEGAND CARD, KEYFOB AND TRANSMITTER Pach and Company warrants the wiegand card, clam, and keyfob to be free of defects in material or workmanship for a period of three (3) months from the date of invoice. AeGIS PARTS LIMITED WARRANTY II. NON-WARRANTY REPLACEMENT PARTS POLICY Pach and Company parts are warranted to be free of defects in material or workmanship for a period of six (6) months), from the date of purchase or repair. This Pach and Company Limited Warranty is in lieu of all other warranties express or implied and all Pach and Company warranties are subject, but not limited, to the following conditions. AeGIS NON-WARRANTY REPAIR LIMITED WARRANTY III. NON-WARRANTY REPAIR POLICY Pach and Company warrants repairs to be free of defects in material or workmanship for a period of three (3) months from the date of repair and invoice. No repair returns accepted without RMA. 7. Return Merchandise Authorization (RMA) numbers will not be issued to the end-user consumers.

Log on to programming mode 1) SINGLE SYSTEM Step 1 Call the AeGIS When the system answer you will hear: One Short Beep: Door is opened. Two Short Beeps: Door is closed. If your Master Code is accepted, you will hear Two Short Beeps and now, you are in the programming mode and proceed to Touch Tone Programming Table 3.1. Note: If the system idles in 30 seconds, the display will return to a scrolling mode. If your Master Code is rejected, the system will disconnect. Pach and Company Chapter 3 Page 7 PROGRAMMING 15 2) MULTI-SYSTEM IN SINGLE TELEPHONE LINE Step 1 Call into the AeGIS 7000 using a touch tone phone. When the system answer you will hear: One Short Beep: Door is opened. One Long Beep: Combination of Closed and open. Press your valid Master Code. If your Master Code is accepted, you will hear Two Short Beeps and you are in the programming mode, then proceed to Touch Tone Programming Table 3.1. Note: If the system idles in 30 seconds, the display will return to a scrolling mode. Follow the next programming sections below to program the tenant database and parameters. TABLE 3.1 PROGRAMMING FUNCTION CODES FUNCTION CODE LOCAL PROGRAMMING TOUCH TONE PROGRAMMING 1. Exit the programming mode by pressing once or twice. 2. Clear the programmed name, phone number or access code by pressing NOT APPLICABLE. Step 1 Log on to programming mode, see section 3.2. If you have logged on. If you press the display shows ERROR DATA Ignore the message, and your existing Master Code will remain in the system. Select another Function Code to program different field from the table or press to exit the programming mode and you hear Three Short Beeps. Directory Code (DIR): A unique (non-duplicating) 2, 3 (factory default) or 4 digit code assigned for each tenant for identification (Used Function Code 06 to Change Directory Digits). It links to tenant name, phone number and access code. The same number of digit must be used on every tenant's directory. Name: up to 16 characters.

2 (b) POST Pach and Company Chapter 2 Page 5 INSTALLATION 13 5 A 12 VAC 40VA transformer is supplied by Pach and Company. However, 12 VDC 40VA power supply or 12VDC power supply with battery backup can be used to power the, use the same connection as shown on figure 2.1. Two conductors, 18-gauge shielded stranded wires must be used. Do not share power transformer or power supply between the AeGIS and other electronic equipment. If the display is blank, turn the system off and see Chapter 4.0 Operations and Chapter 6.0 Trouble Shooting Guides. BATTERY BACKUP 6 The have built-in charging circuit for battery backup. The battery will keep the system in full operation during power failure. Recommended battery is 12 VDC, 4.5 Ahr rechargeable (customer supply). The life of the battery is approximately 8 hours in idle mode. Use two conductors 18-gauge shielded stranded wires. WARNING: The connection is polarity sensitive. See figure 2.1 for wiring diagram. 7 NIGHT LIGHT 14V 0.080A 15,000 Average life hours light bulbs. Use the same rating of replacement light bulb. Now, you are in programming mode, and proceed to Local Programming Table 3.1. If the system idles in 30 seconds, the display will return to a scrolling mode. 2) IF YOU DO NOT HAVE A VALID MASTER CODE, open the panel (key must be used) then press and release the RED BUTTON on the board and Master Code: x x x x x x x x: 4-digit Master Code. The rules below must be followed: Enable the system Auto Answer (see table 3.1 Function Code 74-Enable or Disable Auto Answer), the AeGIS 7000 Series will answer on the first ring. Do not share the AeGIS 7000 phone line with any answering devices such as a fax machine, alarm device or modem. A touch-tone phone must be used. Only letter A-Z can be entered using a touch-tone phone for a person name. No punctuation or number can be entered. A person name only in upper case.

Step4 Press then proceed to step 2 and select the same Function Code or different Function Code to continue programming or press to exit the programming mode and you will hear Three Short Beeps. The system will ignore further access code entries for 90 seconds. If disable, the system will not answer an incoming call. This feature is useful if: Remote touch-tone programming is used or For the tenant to call the system in case the tenant is not available at the time the visitor call. 75 TURN ON OR OFF KEY PRESS BEEP (Default setting is ON) If ON, the system beep if key is pressed. If OFF, the system does not beep if the key is pressed. If OFF, the system does not beep if the door is unlocked. 77 ENABLE REMOTE ACCESS (NOT APPLICABLE ON NEWER SYSTEM) (Default setting is Enabled) If Enable, the system will unlock the door if 9 is pressed. If Disable, the system will not unlock the door if 9 is pressed. Press then proceed to step 2 and select the same Function Code or different Function Code to continue programming or press to exit the programming mode and you will hear Three Short Beeps. NOT AVAILABLE ON NEWER SYSTEM 78 VIEW DIRECTORY BY NAME This Function Code is very useful to find the tenant directory. Pach and Company Chapter 3 Page 17 PROGRAMMING 25 FUNCTION CODE LOCAL PROGRAMMING TOUCH TONE PROGRAMMING Step4 Press then proceed to step 2 and select the same Function Code or different Function Code to continue programming or press to exit the programming mode and you will hear Three Short Beeps. 91 EXIT FROM REMOTE PROGRAMMING NOT AVAILABLE. Pach and Company Chapter 3 Page 18 PROGRAMMING 26 Chapter 4 SYSTEM S OPERATION HOW TO VIEW THE TENANT NAME.DIALING Wait for Answer Press to cancel the call, otherwise wait for the tenant to answer your call. Tenant must press 9 to unlock the door. 2. A DIRECT CALL You must know the tenant directory number to use a direct call. The tenant directory number can be associated with apartment number, suite number, etc.

Press to cancel the call, otherwise wait for the tenant to answer your call. Tenant must press 9 to unlock the door.You will hear One Long Beep ten seconds before the talk time expires. The AeGIS 7000 will accept an incoming call from tenant and tenant can talk to his or her visitor. Function Code 74 (Enable or Disable Auto Answer) must be set to 1. The feature is very useful if for some reason you are not available to answer the visitor call and you can call into the system later on. This feature is not available if multi systems are installed on a single phone line. Step 1 Call the system ( you must know the phone number) then you hear One Short Beep if the call is connected. Press to talk to the visitor then press 9 to unlock the door or hang up. Pach and Company Chapter 4 Page 19 SYSTEM S OPERATION 27 HOW TO PROVIDE REMOTE ACCESS HOW TO DISABLE REMOTE ACCESS HOW TO CALL TO A VOICE MAIL OR EXTENSION NUMBER HOW TO USE THE 4- DIGIT ACCESS CODE TO UNLOCK THE DOOR. Press 9 to unlock the door. Function Code 77 is to disable remote access. Disabling remote access means disable number 9 from unlocking the door. Press the voice mail or extension number after the call is connected. The personal Access Code is used to unlock the door without using the key. It is not mandatory for the manager to provide a personal access code for each tenant. If you decide not to provide a personal access code to each tenants, all you have to do is to leave the Access Code Field blank when you program the tenant directory. See Function code 01. Step 1 Press and the screen stops scrolling then press the 4-digit access code. HOW TO ADJUST THE SPEAKER AND MICROPHONE VOLUME The speaker volume and microphone are factory preset. The adjustment pot is VR2, see figure 2.1. Turn the speaker volume adjustment pot counter-clockwise to increase or clockwise to decrease the speaker volume.

Phone Number: up to 11-digit. Access Code: A 4-digits personal code is assigned to individuals for the purpose of granting entry using the Telephone Entry Systems keypad. Please note the following criteria before entering the tenant Directory Code, Name, Phone Number and Access Code. 1. The Directory Codes can NOT be duplicated. 2. Each Directory Code is considered as one tenant. 3. The existing Directory Codes cannot be changed by another directory code. Tenant Directory cannot be deleted if the directory code is forgotten and no name is programmed. 6. The tenant names may be entered in any order. The system will automatically arrange them it alphabetical order. 7. The same Name, Telephone Number and Access Code can be assigned into different directory code number. Return to. If the memory is full, ERROR DATA You cannot program more tenant unless if you delete the existing one or call Pach and Company to purchase memory upgrade EPROM. Press 8 then 0 for back space ( move cursor to the left. Press to clear all letters or numbers entered. The 4-digit code is for the tenant to to gain access into the door or gate. See operation to use the access code. Proceed to step 2 and select the same Function Code or different Function Code to continue programming or press to exit the programming mode and you hear Three Short Beeps. 02 MODIFY AN EXISTING TENANT DIRECTORY You must know the tenant directory you want to modify. If you do not know the tenant directory, see Function Code78 View Directory by Name. Tenant s name appear To change name: press to erase and program a new one. The Access Code: X X X X X is existing access code. Step 6 Proceed to step 2 and select the same Function Code or different Function Code to continue programming or press to exit the programming mode and you will Three Short Beeps. 03 DELETE AN EXISTING TENANT DIRECTORY Delete an existing tenant one by one. The If the directory does not exist, Proceed to step 2.

Proceed to step 2 and select the same Function Code or different Function Code to continue programming or press to exit the programming mode and you will hear Three Short Beeps. Step 5 Proceed to step 2 and select the same Function Code or different Function Code to continue programming or press to exit the programming mode and you will hear Three Short Beeps. Factory default setting is 3-digit. NOT AVAILABLE. Proceed to step 2 and select the same Function Code or different Function Code to continue programming or press to exit the programming mode and you will hear Three Short Beeps. Pach and Company Chapter 3 Page 12 PROGRAMMING 20 FUNCTION CODE LOCAL PROGRAMMING TOUCH TONE PROGRAMMING 07 SINGLE OR MULTI SYSTEMS (Default setting is Single) You must set the system to multi if more than one systems are installed using a single phone line. You can connect up to eight system on a single phone line. It is not necessary to set the system to multi if separate phone is used for each system. If system is set for multi, Function Code 75 (Key Press Beep) is disabled. 08 SYSTEM NUMBER (Default Setting is 1) It is not necessary to set the system number if: 1. Remote touch-tone programming is not used. 2. Separate phone line is used for each system. Proceed to step 2 and select the same Function Code or different Function Code to continue programming or press to exit the programming mode and you will hear Three Short Beeps. NOT AVAILABLE. NOT AVAILABLE. 10 CHANGE THE WELCOME SCREEN Welcome screen is divided into three segments. Each segment consists of 16 characters. The welcome screen can be a combination of letter and number. Note: See keypad correlation on page SYSTEM INFORMATION Display the model number and the firmware released date. XXX: the model number. The talk time timer starts as soon as the system initiates the call. 71 CHANGE DOOR OPEN INTERVAL (Default setting is 12 seconds) The Door Open Interval is the length of time the relay turns on.

HOW TO ADJUST THE LCD DISPLAY HOW TO ADJUST THE PULSE SENSITIVITY Turn the LCD Adjustment Pot ( VR3) clockwise to increase or counter-clockwise to decrease the intensity. See figure 2.1 to locate the LCD adjustment pot. The Pulse sensitivity is factory preset. If it does not flash, increase the sensitivity by turning the pot counter-clockwise.An accurate tenant's record is essential. You must delete any unused tenant's directory to free the system's memory. If you program a tenant database without programming the tenant s name, the system will not record it in the memory and you will not get an accurate number of tenant in the memory. You may check the total number of tenant in the system as follow: Step 1 Log on to programming mode (see section 3.1), Press to exit, then Total Tnt: XXX XXX is the total number of tenant in the system. Pach and Company Chapter 4 Page 20 SYSTEM S OPERATION View more If you should ever have any questions or concerns about this product, feel free to contact us. Our phone number, web In addition, PagePal furnishes inputs Be sure to read the directions carefully and completely. Before Owner s Manual 1 Model RH520 Model 407780. Introduction Operation is subject to the following two conditions: (1) This device may not cause Elmhurst, IL 66-96 www.liftmaster.

com TABLE OF CONTENTS SPECIFICATIONS 3 Cable Requirements The alarm panel is capable of extensive The dialer can send two different 10 second voice messages Please read this user s guide before installing, setting up, and using your new weather UserOs Manual Notice Every effort was made to ensure that the information in this guide was complete and accurate at the time of Note: This product is designed to be installed and serviced by security and lock industry professionals KX-TS8B KX-TS8W Pulse-or-tone dialing capability KX-TS8W LINE Caller ID Compatible Panasonic World KX-T7FXW Pulse-or-tone dialing capability Operating Instructions Preparation Basic Operation Advanced Operation Useful Information Users Manual Protected Home A Division of Control Products, Inc. 1724 Lake Drive West Chanhassen, MN 55317 San Diego, CA. The KONEXX DWIatt2 (Digital Wall Interface) easily connects to your Lucent Definity, or ProLogix Solutions Installation and User Manual All rights reserved.Door Entry Controller We understand the importance K-1900-30 Touch Tone Dialer with Redialing Quick Guider After getting this alarm system, you need to do the following User s Manual Contents Introduction. 3 Emergency Disarming During the Panic Alarm Activation. Do not operate this unit in direct sunlight, in contact with You ve purchased a HGC EP4300 System Intercom PiSector Inc., USA www.pisector.com Thank you for purchasing this home security alarm system. For your safety and better Owner s Manual All rights reserved.WARNING This manual contains information on limitations regarding product use and function The entire manual should be carefully It operates in conjunction with the Access To use this website, you must agree to our Privacy Policy, including cookie policy. Page 4 LIMITATIONS OF LIABILITY This manual is subject to change without notice. Pach and Company does not assume any liability for any damages, which may arise in installation or use of the AeGIS 7000 Series.

Pach and Company does not assume liability for any incompatibility between the AeGIS 7000 Series and users devices. It is important for you to read and follow the manual completely.Page 11 Chapter 2 INSTALLATION A proper installation of the AeGIS system is very essential. You MUST follow the installation procedures, block diagrams and installation requirements as specified in this chapter. 7 5 3 6 1 4 2 Figure 2. Page 12 1 GROUNDING Grounding the AeGIS steel enclosure is essential. Connecting the AeGIS steel enclosure to any earth grounded steel metal. Page 13 5 A 12 VAC 40VA transformer is supplied by Pach and Company. Page 15 2) MULTI-SYSTEM IN SINGLE TELEPHONE LINE Step 1 Call into the AeGIS 7000 using a touch tone phone. Step 3 Press your valid Master Code. If system is set for multi, Function Code 75 (Key Press Beep) is disabled. Page 26 Chapter 4 SYSTEM’S OPERATION HOW TO VIEW THE TENANT NAME. Two ways to view the tenant name: 1. Press 3 to scroll the tenant name from A to Z. 2. Press 6 to scroll the tenant name from Z to A. HOW TO INITIATE A CALL AND UNLOCK THE DOOR FOR VISITOR. The display shows: WAIT... Page 27 HOW TO PROVIDE REMOTE ACCESS HOW TO DISABLE REMOTE ACCESS HOW TO CALL TO A VOICE MAIL OR EXTENSION NUMBER HOW TO USE THE 4DIGIT ACCESS CODE TO UNLOCK THE DOOR. Page 31 GENERAL FCC REQUIREMENTS This equipment complies with Part 68 of the FCC rules. Located on the back of your AeGIS system is a label that contains, among other information, the FCC registration and ringer equivalence number (REN) for the system. Now, you are in programming mode and see table below to continue. Please choose a different delivery location.Our payment security system encrypts your information during transmission. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. Please try again.Please try again.Full Flush With The Frame. Trim Ring Included.Lighted keypad buttons. Single relaySurface and full-flush mount.

Indoor or outdoorIn order to navigate out of this carousel please use your heading shortcut key to navigate to the next or previous heading. Register a free business account Please try your search again later.A professional installer will need to troubleshoot any technical issues with factories tech support person, not a homeowner. This would be required prior to any return. Our company is not responsible for personal or property damages due to improper installations. Warranty does not cover any damages caused by unprofessional installation, improper use or improper installation. Damages due to weather, terrorism or acts of god are also not covered by warranty. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzes reviews to verify trustworthiness. Please try again later. Jjimenez 4.0 out of 5 stars. We offer this service free of charge to make it a convenient one stop website for all your access control needs, including installation instructions, manuals and brochures for garage door opener accessories as well. For those, click here. We carry all of the products listed below, some of which are listed on this site, click here for a sampling of our gate operator and telephone entry system product line. We also offer special pricing for construction companies, architects, property management companies, resellers, exporters and more. Please feel free to contact us should you have any questions or if you don’t see the item you need or for special pricing. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of Mega Controls, Inc. Remote unlock relay 1Remote unlock relay 2Master code mask.

Warning: Master codeDisplay system’sClear memory to factoryAdd new tenantMust be set to 0V22 or B212Tone is defaultDisable is default. View name andTalk time (10-180Total number of tenant. Tenant with no nameTwo ways call from the systemZ-A then pressOpening the door using the access code pressExtending talk time tenant must pressCalling into the system: incase you are not available whenFollow steps below to use this featureQuick GuideLog on to programming: PressSelect the “Function Code” from the tableYou have 30 seconds to enter each letter or character.Black Button go to programming without Master CodeOr see functionOpening the door remotely pressWhat is Master Code: 4- digit code to log-on to programming modeWhat is Dir (directory code): 2, 3, or 4 digit number see functionEvery tenant must have different directoryWhat is Access Code: 4-digit code for tenant to open the door or. You must have JavaScript enabled in your browser to utilize the functionality of this website. Please, log in or register You can simply remove the item from your cart. You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart. Aegis 8000. AeGIS 7000 Series Installation and Programming Manual REV. TABLE OF CONTENTS Limitations of Liability Chapter 1. Getting Started. Introduction.1 1.2. System Description, Specifications and Accessories.1 1.3 Unpacking the System. 2 1.4 Warranty.3 Chapter 2. Installation.4 Chapter 3. Programming.7 3.1. Pach and Company does not assume any liability for any damages, which may arise in installation or use of the AeGIS 7000 Series. If they do not match, please contact Pach and Company toll free number at (888) 678-7224. All the items listed below come with the AeGIS 7000 Series. If you have missing items, please contact your distributor or Pach and Company at (888) 678-7224. Pach and Company Chapter 1 Page 3 AeGIS 7000 Series GETTING STARTED.